Contract Reference

IEuler

Main storage contract for the Euler system

moduleIdToImplementation

Lookup the current implementation contract for a module

function moduleIdToImplementation(uint moduleId) external view returns (address);

Parameters:

moduleId: Fixed constant that refers to a module type (ie MODULEID__ETOKEN)

Returns:

An internal address specifies the module's implementation code

moduleIdToProxy

Lookup a proxy that can be used to interact with a module (only valid for single-proxy modules)

function moduleIdToProxy(uint moduleId) external view returns (address);

Parameters:

moduleId: Fixed constant that refers to a module type (ie MODULEID__MARKETS)

Returns:

An address that should be cast to the appropriate module interface, ie IEulerMarkets(moduleIdToProxy(2))

AssetConfig

Euler-related configuration for an asset

struct AssetConfig {
    address eTokenAddress;
    bool borrowIsolated;
    uint32 collateralFactor;
    uint32 borrowFactor;
    uint24 twapWindow;
}

IEulerMarkets

Activating and querying markets, and maintaining entered markets lists

activateMarket

Create an Euler pool and associated EToken and DToken addresses.

function activateMarket(address underlying) external returns (address);

Parameters:

underlying: The address of an ERC20-compliant token. There must be an initialised uniswap3 pool for the underlying/reference asset pair.

Returns:

The created EToken, or the existing EToken if already activated.

activatePToken

Create a pToken and activate it on Euler. pTokens are protected wrappers around assets that prevent borrowing.

function activatePToken(address underlying) external returns (address);

Parameters:

underlying: The address of an ERC20-compliant token. There must already be an activated market on Euler for this underlying, and it must have a non-zero collateral factor.

Returns:

The created pToken, or an existing one if already activated.

underlyingToEToken

Given an underlying, lookup the associated EToken

function underlyingToEToken(address underlying) external view returns (address);

Parameters:

underlying: Token address

Returns:

EToken address, or address(0) if not activated

underlyingToDToken

Given an underlying, lookup the associated DToken

function underlyingToDToken(address underlying) external view returns (address);

Parameters:

underlying: Token address

Returns:

DToken address, or address(0) if not activated

underlyingToPToken

Given an underlying, lookup the associated PToken

function underlyingToPToken(address underlying) external view returns (address);

Parameters:

underlying: Token address

Returns:

PToken address, or address(0) if it doesn't exist

underlyingToAssetConfig

Looks up the Euler-related configuration for a token, and resolves all default-value placeholders to their currently configured values.

function underlyingToAssetConfig(address underlying) external view returns (IEuler.AssetConfig memory);

Parameters:

underlying: Token address

Returns:

Configuration struct

underlyingToAssetConfigUnresolved

Looks up the Euler-related configuration for a token, and returns it unresolved (with default-value placeholders)

function underlyingToAssetConfigUnresolved(address underlying) external view returns (IEuler.AssetConfig memory config);

Parameters:

underlying: Token address

Returns:

config: Configuration struct

eTokenToUnderlying

Given an EToken address, looks up the associated underlying

function eTokenToUnderlying(address eToken) external view returns (address underlying);

Parameters:

eToken: EToken address

Returns:

underlying: Token address

dTokenToUnderlying

Given a DToken address, looks up the associated underlying

function dTokenToUnderlying(address dToken) external view returns (address underlying);

Parameters:

dToken: DToken address

Returns:

underlying: Token address

eTokenToDToken

Given an EToken address, looks up the associated DToken

function eTokenToDToken(address eToken) external view returns (address dTokenAddr);

Parameters:

eToken: EToken address

Returns:

dTokenAddr: DToken address

interestRateModel

Looks up an asset's currently configured interest rate model

function interestRateModel(address underlying) external view returns (uint);

Parameters:

underlying: Token address

Returns:

Module ID that represents the interest rate model (IRM)

interestRate

Retrieves the current interest rate for an asset

function interestRate(address underlying) external view returns (int96);

Parameters:

underlying: Token address

Returns:

The interest rate in yield-per-second, scaled by 10**27

interestAccumulator

Retrieves the current interest rate accumulator for an asset

function interestAccumulator(address underlying) external view returns (uint);

Parameters:

underlying: Token address

Returns:

An opaque accumulator that increases as interest is accrued

reserveFee

Retrieves the reserve fee in effect for an asset

function reserveFee(address underlying) external view returns (uint32);

Parameters:

underlying: Token address

Returns:

Amount of interest that is redirected to the reserves, as a fraction scaled by RESERVE_FEE_SCALE (4e9)

getPricingConfig

Retrieves the pricing config for an asset

function getPricingConfig(address underlying) external view returns (uint16 pricingType, uint32 pricingParameters, address pricingForwarded);

Parameters:

underlying: Token address

Returns:

pricingType: (1=pegged, 2=uniswap3, 3=forwarded, 4=chainlink)
pricingParameters: If uniswap3 pricingType then this represents the uniswap pool fee used, if chainlink pricing type this represents the fallback uniswap pool fee or 0 if none
pricingForwarded: If forwarded pricingType then this is the address prices are forwarded to, otherwise address(0)

getChainlinkPriceFeedConfig

Retrieves the Chainlink price feed config for an asset

function getChainlinkPriceFeedConfig(address underlying) external view returns (address chainlinkAggregator);

Parameters:

underlying: Token address

Returns:

chainlinkAggregator: Chainlink aggregator proxy address

getEnteredMarkets

Retrieves the list of entered markets for an account (assets enabled for collateral or borrowing)

function getEnteredMarkets(address account) external view returns (address[] memory);

Parameters:

account: User account

Returns:

List of underlying token addresses

enterMarket

Add an asset to the entered market list, or do nothing if already entered

function enterMarket(uint subAccountId, address newMarket) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
newMarket: Underlying token address

exitMarket

Remove an asset from the entered market list, or do nothing if not already present

function exitMarket(uint subAccountId, address oldMarket) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
oldMarket: Underlying token address

IEulerExec

Batch executions, liquidity check deferrals, and interfaces to fetch prices and account liquidity

LiquidityStatus

Liquidity status for an account, either in aggregate or for a particular asset

struct LiquidityStatus {
    uint collateralValue;
    uint liabilityValue;
    uint numBorrows;
    bool borrowIsolated;
}

AssetLiquidity

Aggregate struct for reporting detailed (per-asset) liquidity for an account

struct AssetLiquidity {
    address underlying;
    LiquidityStatus status;
}

EulerBatchItem

Single item in a batch request

struct EulerBatchItem {
    bool allowError;
    address proxyAddr;
    bytes data;
}

EulerBatchItemResponse

Single item in a batch response

struct EulerBatchItemResponse {
    bool success;
    bytes result;
}

BatchDispatchSimulation

Error containing results of a simulated batch dispatch

error BatchDispatchSimulation(EulerBatchItemResponse[] simulation);

liquidity

Compute aggregate liquidity for an account

function liquidity(address account) external view returns (LiquidityStatus memory status);

Parameters:

account: User address

Returns:

status: Aggregate liquidity (sum of all entered assets)

detailedLiquidity

Compute detailed liquidity for an account, broken down by asset

function detailedLiquidity(address account) external view returns (AssetLiquidity[] memory assets);

Parameters:

account: User address

Returns:

assets: List of user's entered assets and each asset's corresponding liquidity

getPrice

Retrieve Euler's view of an asset's price

function getPrice(address underlying) external view returns (uint twap, uint twapPeriod);

Parameters:

underlying: Token address

Returns:

twap: Time-weighted average price
twapPeriod: TWAP duration, either the twapWindow value in AssetConfig, or less if that duration not available

getPriceFull

Retrieve Euler's view of an asset's price, as well as the current marginal price on uniswap

function getPriceFull(address underlying) external view returns (uint twap, uint twapPeriod, uint currPrice);

Parameters:

underlying: Token address

Returns:

twap: Time-weighted average price
twapPeriod: TWAP duration, either the twapWindow value in AssetConfig, or less if that duration not available
currPrice: The current marginal price on uniswap3 (informational: not used anywhere in the Euler protocol)

deferLiquidityCheck

Defer liquidity checking for an account, to perform rebalancing, flash loans, etc. msg.sender must implement IDeferredLiquidityCheck

function deferLiquidityCheck(address account, bytes memory data) external;

Parameters:

account: The account to defer liquidity for. Usually address(this), although not always
data: Passed through to the onDeferredLiquidityCheck() callback, so contracts don't need to store transient data in storage

batchDispatch

Execute several operations in a single transaction

function batchDispatch(EulerBatchItem[] calldata items, address[] calldata deferLiquidityChecks) external;

Parameters:

items: List of operations to execute
deferLiquidityChecks: List of user accounts to defer liquidity checks for

batchDispatchSimulate

Call batch dispatch, but instruct it to revert with the responses, before the liquidity checks.

function batchDispatchSimulate(EulerBatchItem[] calldata items, address[] calldata deferLiquidityChecks) external;

Parameters:

items: List of operations to execute
deferLiquidityChecks: List of user accounts to defer liquidity checks for

trackAverageLiquidity

Enable average liquidity tracking for your account. Operations will cost more gas, but you may get additional benefits when performing liquidations

function trackAverageLiquidity(uint subAccountId, address delegate, bool onlyDelegate) external;

Parameters:

subAccountId: subAccountId 0 for primary, 1-255 for a sub-account.
delegate: An address of another account that you would allow to use the benefits of your account's average liquidity (use the null address if you don't care about this). The other address must also reciprocally delegate to your account.
onlyDelegate: Set this flag to skip tracking average liquidity and only set the delegate.

unTrackAverageLiquidity

Disable average liquidity tracking for your account and remove delegate

function unTrackAverageLiquidity(uint subAccountId) external;

Parameters:

subAccountId: subAccountId 0 for primary, 1-255 for a sub-account

getAverageLiquidity

Retrieve the average liquidity for an account

function getAverageLiquidity(address account) external returns (uint);

Parameters:

account: User account (xor in subAccountId, if applicable)

Returns:

The average liquidity, in terms of the reference asset, and post risk-adjustment

getAverageLiquidityWithDelegate

Retrieve the average liquidity for an account or a delegate account, if set

function getAverageLiquidityWithDelegate(address account) external returns (uint);

Parameters:

account: User account (xor in subAccountId, if applicable)

Returns:

The average liquidity, in terms of the reference asset, and post risk-adjustment

getAverageLiquidityDelegateAccount

Retrieve the account which delegates average liquidity for an account, if set

function getAverageLiquidityDelegateAccount(address account) external view returns (address);

Parameters:

account: User account (xor in subAccountId, if applicable)

Returns:

The average liquidity delegate account

pTokenWrap

Transfer underlying tokens from sender's wallet into the pToken wrapper. Allowance should be set for the euler address.

function pTokenWrap(address underlying, uint amount) external;

Parameters:

underlying: Token address
amount: The amount to wrap in underlying units

pTokenUnWrap

Transfer underlying tokens from the pToken wrapper to the sender's wallet.

function pTokenUnWrap(address underlying, uint amount) external;

Parameters:

underlying: Token address
amount: The amount to unwrap in underlying units

usePermit

Apply EIP2612 signed permit on a target token from sender to euler contract

function usePermit(address token, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;

Parameters:

token: Token address
value: Allowance value
deadline: Permit expiry timestamp
v: secp256k1 signature v
r: secp256k1 signature r
s: secp256k1 signature s

usePermitAllowed

Apply DAI like (allowed) signed permit on a target token from sender to euler contract

function usePermitAllowed(address token, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s) external;

Parameters:

token: Token address
nonce: Sender nonce
expiry: Permit expiry timestamp
allowed: If true, set unlimited allowance, otherwise set zero allowance
v: secp256k1 signature v
r: secp256k1 signature r
s: secp256k1 signature s

usePermitPacked

Apply allowance to tokens expecting the signature packed in a single bytes param

function usePermitPacked(address token, uint256 value, uint256 deadline, bytes calldata signature) external;

Parameters:

token: Token address
value: Allowance value
deadline: Permit expiry timestamp
signature: secp256k1 signature encoded as rsv

doStaticCall

Execute a staticcall to an arbitrary address with an arbitrary payload.

function doStaticCall(address contractAddress, bytes memory payload) external view returns (bytes memory);

Parameters:

contractAddress: Address of the contract to call
payload: Encoded call payload

Returns:

result: Encoded return data

IEulerEToken

Tokenised representation of assets

name

Pool name, ie "Euler Pool: DAI"

function name() external view returns (string memory);

symbol

Pool symbol, ie "eDAI"

function symbol() external view returns (string memory);

decimals

Decimals, always normalised to 18.

function decimals() external pure returns (uint8);

underlyingAsset

Address of underlying asset

function underlyingAsset() external view returns (address);

totalSupply

Sum of all balances, in internal book-keeping units (non-increasing)

function totalSupply() external view returns (uint);

totalSupplyUnderlying

Sum of all balances, in underlying units (increases as interest is earned)

function totalSupplyUnderlying() external view returns (uint);

balanceOf

Balance of a particular account, in internal book-keeping units (non-increasing)

function balanceOf(address account) external view returns (uint);

balanceOfUnderlying

Balance of a particular account, in underlying units (increases as interest is earned)

function balanceOfUnderlying(address account) external view returns (uint);

reserveBalance

Balance of the reserves, in internal book-keeping units (non-increasing)

function reserveBalance() external view returns (uint);

reserveBalanceUnderlying

Balance of the reserves, in underlying units (increases as interest is earned)

function reserveBalanceUnderlying() external view returns (uint);

convertBalanceToUnderlying

Convert an eToken balance to an underlying amount, taking into account current exchange rate

function convertBalanceToUnderlying(uint balance) external view returns (uint);

Parameters:

balance: eToken balance, in internal book-keeping units (18 decimals)

Returns:

Amount in underlying units, (same decimals as underlying token)

convertUnderlyingToBalance

Convert an underlying amount to an eToken balance, taking into account current exchange rate

function convertUnderlyingToBalance(uint underlyingAmount) external view returns (uint);

Parameters:

underlyingAmount: Amount in underlying units (same decimals as underlying token)

Returns:

eToken: balance, in internal book-keeping units (18 decimals)

touch

Updates interest accumulator and totalBorrows, credits reserves, re-targets interest rate, and logs asset status

function touch() external;

deposit

Transfer underlying tokens from sender to the Euler pool, and increase account's eTokens

function deposit(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In underlying units (use max uint256 for full underlying token balance)

withdraw

Transfer underlying tokens from Euler pool to sender, and decrease account's eTokens

function withdraw(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In underlying units (use max uint256 for full pool balance)

mint

Mint eTokens and a corresponding amount of dTokens ("self-borrow")

function mint(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In underlying units

burn

Pay off dToken liability with eTokens ("self-repay")

function burn(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In underlying units (use max uint256 to repay the debt in full or up to the available underlying balance)

approve

Allow spender to access an amount of your eTokens in sub-account 0

function approve(address spender, uint amount) external returns (bool);

Parameters:

spender: Trusted address
amount: Use max uint256 for "infinite" allowance

approveSubAccount

Allow spender to access an amount of your eTokens in a particular sub-account

function approveSubAccount(uint subAccountId, address spender, uint amount) external returns (bool);

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
spender: Trusted address
amount: Use max uint256 for "infinite" allowance

allowance

Retrieve the current allowance

function allowance(address holder, address spender) external view returns (uint);

Parameters:

holder: Xor with the desired sub-account ID (if applicable)
spender: Trusted address

transfer

Transfer eTokens to another address (from sub-account 0)

function transfer(address to, uint amount) external returns (bool);

Parameters:

to: Xor with the desired sub-account ID (if applicable)
amount: In internal book-keeping units (as returned from balanceOf).

transferFromMax

Transfer the full eToken balance of an address to another

function transferFromMax(address from, address to) external returns (bool);

Parameters:

from: This address must've approved the to address, or be a sub-account of msg.sender
to: Xor with the desired sub-account ID (if applicable)

transferFrom

Transfer eTokens from one address to another

function transferFrom(address from, address to, uint amount) external returns (bool);

Parameters:

from: This address must've approved the to address, or be a sub-account of msg.sender
to: Xor with the desired sub-account ID (if applicable)
amount: In internal book-keeping units (as returned from balanceOf).

donateToReserves

Donate eTokens to the reserves

function donateToReserves(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In internal book-keeping units (as returned from balanceOf).

IEulerDToken

Tokenised representation of debts

name

Debt token name, ie "Euler Debt: DAI"

function name() external view returns (string memory);

symbol

Debt token symbol, ie "dDAI"

function symbol() external view returns (string memory);

decimals

Decimals of underlying

function decimals() external view returns (uint8);

underlyingAsset

Address of underlying asset

function underlyingAsset() external view returns (address);

totalSupply

Sum of all outstanding debts, in underlying units (increases as interest is accrued)

function totalSupply() external view returns (uint);

totalSupplyExact

Sum of all outstanding debts, in underlying units normalized to 27 decimals (increases as interest is accrued)

function totalSupplyExact() external view returns (uint);

balanceOf

Debt owed by a particular account, in underlying units

function balanceOf(address account) external view returns (uint);

balanceOfExact

Debt owed by a particular account, in underlying units normalized to 27 decimals

function balanceOfExact(address account) external view returns (uint);

borrow

Transfer underlying tokens from the Euler pool to the sender, and increase sender's dTokens

function borrow(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In underlying units (use max uint256 for all available tokens)

repay

Transfer underlying tokens from the sender to the Euler pool, and decrease sender's dTokens

function repay(uint subAccountId, uint amount) external;

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
amount: In underlying units (use max uint256 for full debt owed)

flashLoan

Request a flash-loan. A onFlashLoan() callback in msg.sender will be invoked, which must repay the loan to the main Euler address prior to returning.

function flashLoan(uint amount, bytes calldata data) external;

Parameters:

amount: In underlying units
data: Passed through to the onFlashLoan() callback, so contracts don't need to store transient data in storage

approveDebt

Allow spender to send an amount of dTokens to a particular sub-account

function approveDebt(uint subAccountId, address spender, uint amount) external returns (bool);

Parameters:

subAccountId: 0 for primary, 1-255 for a sub-account
spender: Trusted address
amount: In underlying units (use max uint256 for "infinite" allowance)

debtAllowance

Retrieve the current debt allowance

function debtAllowance(address holder, address spender) external view returns (uint);

Parameters:

holder: Xor with the desired sub-account ID (if applicable)
spender: Trusted address

transfer

Transfer dTokens to another address (from sub-account 0)

function transfer(address to, uint amount) external returns (bool);

Parameters:

to: Xor with the desired sub-account ID (if applicable)
amount: In underlying units. Use max uint256 for full balance.

transferFrom

Transfer dTokens from one address to another

function transferFrom(address from, address to, uint amount) external returns (bool);

Parameters:

from: Xor with the desired sub-account ID (if applicable)
to: This address must've approved the from address, or be a sub-account of msg.sender
amount: In underlying units. Use max uint256 for full balance.

IEulerLiquidation

Liquidate users who are in collateral violation to protect lenders

LiquidationOpportunity

Information about a prospective liquidation opportunity

struct LiquidationOpportunity {
    uint repay;
    uint yield;
    uint healthScore;

    // Only populated if repay > 0:
    uint baseDiscount;
    uint discount;
    uint conversionRate;
}

checkLiquidation

Checks to see if a liquidation would be profitable, without actually doing anything

function checkLiquidation(address liquidator, address violator, address underlying, address collateral) external returns (LiquidationOpportunity memory liqOpp);

Parameters:

liquidator: Address that will initiate the liquidation
violator: Address that may be in collateral violation
underlying: Token that is to be repayed
collateral: Token that is to be seized

Returns:

liqOpp: The details about the liquidation opportunity

liquidate

Attempts to perform a liquidation

function liquidate(address violator, address underlying, address collateral, uint repay, uint minYield) external;

Parameters:

violator: Address that may be in collateral violation
underlying: Token that is to be repayed
collateral: Token that is to be seized
repay: The amount of underlying DTokens to be transferred from violator to sender, in units of underlying
minYield: The minimum acceptable amount of collateral ETokens to be transferred from violator to sender, in units of collateral

IEulerSwap

Trading assets on Uniswap V3 and 1Inch V4 DEXs

SwapUniExactInputSingleParams

Params for Uniswap V3 exact input trade on a single pool

struct SwapUniExactInputSingleParams {
    uint subAccountIdIn;
    uint subAccountIdOut;
    address underlyingIn;
    address underlyingOut;
    uint amountIn;
    uint amountOutMinimum;
    uint deadline;
    uint24 fee;
    uint160 sqrtPriceLimitX96;
}

Parameters:

subAccountIdIn: subaccount id to trade from
subAccountIdOut: subaccount id to trade to
underlyingIn: sold token address
underlyingOut: bought token address
amountIn: amount of token to sell
amountOutMinimum: minimum amount of bought token
deadline: trade must complete before this timestamp
fee: uniswap pool fee to use
sqrtPriceLimitX96: maximum acceptable price

SwapUniExactInputParams

Params for Uniswap V3 exact input trade routed through multiple pools

struct SwapUniExactInputParams {
    uint subAccountIdIn;
    uint subAccountIdOut;
    uint amountIn;
    uint amountOutMinimum;
    uint deadline;
    bytes path; // list of pools to hop - constructed with uni SDK 
}

Parameters:

subAccountIdIn: subaccount id to trade from
subAccountIdOut: subaccount id to trade to
underlyingIn: sold token address
underlyingOut: bought token address
amountIn: amount of token to sell
amountOutMinimum: minimum amount of bought token
deadline: trade must complete before this timestamp
path: list of pools to use for the trade

SwapUniExactOutputSingleParams

Params for Uniswap V3 exact output trade on a single pool

struct SwapUniExactOutputSingleParams {
    uint subAccountIdIn;
    uint subAccountIdOut;
    address underlyingIn;
    address underlyingOut;
    uint amountOut;
    uint amountInMaximum;
    uint deadline;
    uint24 fee;
    uint160 sqrtPriceLimitX96;
}

Parameters:

subAccountIdIn: subaccount id to trade from
subAccountIdOut: subaccount id to trade to
underlyingIn: sold token address
underlyingOut: bought token address
amountOut: amount of token to buy
amountInMaximum: maximum amount of sold token
deadline: trade must complete before this timestamp
fee: uniswap pool fee to use
sqrtPriceLimitX96: maximum acceptable price

SwapUniExactOutputParams

Params for Uniswap V3 exact output trade routed through multiple pools

struct SwapUniExactOutputParams {
    uint subAccountIdIn;
    uint subAccountIdOut;
    uint amountOut;
    uint amountInMaximum;
    uint deadline;
    bytes path;
}

Parameters:

subAccountIdIn: subaccount id to trade from
subAccountIdOut: subaccount id to trade to
underlyingIn: sold token address
underlyingOut: bought token address
amountOut: amount of token to buy
amountInMaximum: maximum amount of sold token
deadline: trade must complete before this timestamp
path: list of pools to use for the trade

Swap1InchParams

Params for 1Inch trade

struct Swap1InchParams {
    uint subAccountIdIn;
    uint subAccountIdOut;
    address underlyingIn;
    address underlyingOut;
    uint amount;
    uint amountOutMinimum;
    bytes payload;
}

Parameters:

subAccountIdIn: subaccount id to trade from
subAccountIdOut: subaccount id to trade to
underlyingIn: sold token address
underlyingOut: bought token address
amount: amount of token to sell
amountOutMinimum: minimum amount of bought token
payload: call data passed to 1Inch contract

swapUniExactInputSingle

Execute Uniswap V3 exact input trade on a single pool

function swapUniExactInputSingle(SwapUniExactInputSingleParams memory params) external;

Parameters:

params: struct defining trade parameters

swapUniExactInput

Execute Uniswap V3 exact input trade routed through multiple pools

function swapUniExactInput(SwapUniExactInputParams memory params) external;

Parameters:

params: struct defining trade parameters

swapUniExactOutputSingle

Execute Uniswap V3 exact output trade on a single pool

function swapUniExactOutputSingle(SwapUniExactOutputSingleParams memory params) external;

Parameters:

params: struct defining trade parameters

swapUniExactOutput

Execute Uniswap V3 exact output trade routed through multiple pools

function swapUniExactOutput(SwapUniExactOutputParams memory params) external;

Parameters:

params: struct defining trade parameters

swapAndRepayUniSingle

Trade on Uniswap V3 single pool and repay debt with bought asset

function swapAndRepayUniSingle(SwapUniExactOutputSingleParams memory params, uint targetDebt) external;

Parameters:

params: struct defining trade parameters (amountOut is ignored)
targetDebt: amount of debt that is expected to remain after trade and repay (0 to repay full debt)

swapAndRepayUni

Trade on Uniswap V3 through multiple pools pool and repay debt with bought asset

function swapAndRepayUni(SwapUniExactOutputParams memory params, uint targetDebt) external;

Parameters:

params: struct defining trade parameters (amountOut is ignored)
targetDebt: amount of debt that is expected to remain after trade and repay (0 to repay full debt)

swap1Inch

Execute 1Inch V4 trade

function swap1Inch(Swap1InchParams memory params) external;

Parameters:

params: struct defining trade parameters

IEulerSwapHub

Common logic for executing and processing trades through external swap handler contracts

SwapParams

Params defining a swap request

struct SwapParams {
    address underlyingIn;
    address underlyingOut;
    uint mode;
    uint amountIn;
    uint amountOut;
    uint exactOutTolerance;
    bytes payload;
}

swap

Execute a trade using the requested swap handler

function swap(uint subAccountIdIn, uint subAccountIdOut, address swapHandler, SwapParams memory params) external;

Parameters:

subAccountIdIn: sub-account holding the sold token. 0 for primary, 1-255 for a sub-account
subAccountIdOut: sub-account to receive the bought token. 0 for primary, 1-255 for a sub-account
swapHandler: address of a swap handler to use
params: struct defining the requested trade

swapAndRepay

Repay debt by selling another deposited token

function swapAndRepay(uint subAccountIdIn, uint subAccountIdOut, address swapHandler, SwapParams memory params, uint targetDebt) external;

Parameters:

subAccountIdIn: sub-account holding the sold token. 0 for primary, 1-255 for a sub-account
subAccountIdOut: sub-account to receive the bought token. 0 for primary, 1-255 for a sub-account
swapHandler: address of a swap handler to use
params: struct defining the requested trade
targetDebt: how much debt should remain after calling the function

IEulerPToken

Protected Tokens are simple wrappers for tokens, allowing you to use tokens as collateral without permitting borrowing

name

PToken name, ie "Euler Protected DAI"

function name() external view returns (string memory);

symbol

PToken symbol, ie "pDAI"

function symbol() external view returns (string memory);

decimals

Number of decimals, which is same as the underlying's

function decimals() external view returns (uint8);

underlying

Address of the underlying asset

function underlying() external view returns (address);

balanceOf

Balance of an account's wrapped tokens

function balanceOf(address who) external view returns (uint);

totalSupply

Sum of all wrapped token balances

function totalSupply() external view returns (uint);

allowance

Retrieve the current allowance

function allowance(address holder, address spender) external view returns (uint);

Parameters:

holder: Address giving permission to access tokens
spender: Trusted address

transfer

Transfer your own pTokens to another address

function transfer(address recipient, uint amount) external returns (bool);

Parameters:

recipient: Recipient address
amount: Amount of wrapped token to transfer

transferFrom

Transfer pTokens from one address to another. The euler address is automatically granted approval.

function transferFrom(address from, address recipient, uint amount) external returns (bool);

Parameters:

from: This address must've approved the to address
recipient: Recipient address
amount: Amount to transfer

approve

Allow spender to access an amount of your pTokens. It is not necessary to approve the euler address.

function approve(address spender, uint amount) external returns (bool);

Parameters:

spender: Trusted address
amount: Use max uint256 for "infinite" allowance

wrap

Convert underlying tokens to pTokens

function wrap(uint amount) external;

Parameters:

amount: In underlying units (which are equivalent to pToken units)

unwrap

Convert pTokens to underlying tokens

function unwrap(uint amount) external;

Parameters:

amount: In pToken units (which are equivalent to underlying units)

claimSurplus

Claim any surplus tokens held by the PToken contract. This should only be used by contracts.

function claimSurplus(address who) external;

Parameters:

who: Beneficiary to be credited for the surplus token amount

IEulerEulDistributor

claim

Claim distributed tokens

function claim(address account, address token, uint claimable, bytes32[] calldata proof, address stake) external;

Parameters:

account: Address that should receive tokens
token: Address of token being claimed (ie EUL)
proof: Merkle proof that validates this claim
stake: If non-zero, then the address of a token to auto-stake to, instead of claiming

IEulerEulStakes

staked

Retrieve current amount staked

function staked(address account, address underlying) external view returns (uint);

Parameters:

account: User address
underlying: Token staked upon

Returns:

Amount of EUL token staked

StakeOp

Staking operation item. Positive amount means to increase stake on this underlying, negative to decrease.

struct StakeOp {
    address underlying;
    int amount;
}

stake

Modify stake of a series of underlyings. If the sum of all amounts is positive, then this amount of EUL will be transferred in from the sender's wallet. If negative, EUL will be transferred out to the sender's wallet.

function stake(StakeOp[] memory ops) external;

Parameters:

ops: Array of operations to perform

stakeGift

Increase stake on an underlying, and transfer this stake to a beneficiary

function stakeGift(address beneficiary, address underlying, uint amount) external;

Parameters:

beneficiary: Who is given credit for this staked EUL
underlying: The underlying token to be staked upon
amount: How much EUL to stake

stakePermit

Applies a permit() signature to EUL and then applies a sequence of staking operations

function stakePermit(StakeOp[] memory ops, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

Parameters:

ops: Array of operations to perform
value: The value field of the permit message
deadline: The deadline field of the permit message
v: Signature field
r: Signature field
s: Signature field

PreviousContract Integration Guide NextArchitecture

Last updated 1 year ago